Study of MoO3 doping effect on linear and Non-linear optical properties of Cellulose acetate (CA) films
الكلمات المفتاحية:
CA; SELF; static dielectric constant; refractive index; oscillation energyالملخص
The goal of this study was to investigate the optical properties of the prepared
CA-MoO3 nanocomposites films. CA has been chosen as a host matrix and then
doped with MoO3 with different concentrations (2.5, 5, 10 and 15wt. %) of MoO3
by using casting procedure. CA-MoO3 films were characterized by UV-Visible
spectrophotometer within the wavelength range of 200 nm-800 nm. The Linear
optical parameters (transmission (T), extinction coefficient (K), reflectance (R),
refractive index (n), real (ε1) and imaginary (ε2 ) part of the dielectric constant and
optical conductivity (σopt )) of CA-MoO3 films were obtained from absorption
spectra. The volume (VELF) and surface (SELF) energy loss function of CAMoO3
films were obtained by complex dielectric constant. The Dispersion
parameters (dispersion energy (Ed ), oscillation energy (E0 ), static dielectric
constant (ε0 ) and static refractive index (n0 )) were calculated using theoretical
Wemple-DiDomenico model. The nonlinear optical susceptibility x(1), x(3) and
nonlinear refractive index n2 were evaluated from the linear optical parameters
using semiempirical relation. The results show that the Linear and nonlinear
optical parameters change with the increase of molybdenum trioxide
concentration, where, the transmittance, oscillator energy, the volume (VELF)
and surface (SELF) energy loss decreases with the increase of MoO3
concentration.
المراجع
Reference
Badawi, A. (2021), Enhancement of the optical properties of PVP using Zn1-xSnxS for UV-region optical applications, Appl PhysA, 127:51,1-9
Xiao, W., Song, J., Huang, L., Yang, Z., Qiao, Q. (2020), PVA-ZrO2 multilayer composite separator with enhanced electrolyte property and mechanical strength for lithium-ion batteries. Ceram Int, 46,29212–29221.
Badawi, A.and Alharthi, SS. (2020), Controlling the optical and mechanical properties of polyvinyl alcohol using Ag2S semiconductor for environmentally friendly applications, Mater SciSemicond Process, 116, 1-8.
Kabir, H., Nandyala, SH., Rahman, MM., Kabir, MA., Pikramenou, Z., Laver, M.,and Stamboulis, A. (2019), Polyethylene glycol assisted facile sol-gel synthesis of lanthanum oxide nanoparticles: Structural characterizations and photoluminescence studies, Ceram Int, 45,424–431.
Badawi, A., Alharthi, SS., Mostafa, NY., Althobaiti, MG., and Altalhi, T. (2019), Effect of carbon quantum dots on the optical and electrical properties of polyvinylidene fluoride polymer for optoelectronic applications, Appl Phys A, 125,1-9
El-Zaidia, E., Ali, H., Hamdalla, T., Darwish, A., and Hanafy, T. (2020), Optical linearity and bandgap analysis of Erythrosine B doped in polyvinyl alcohol films. Opt Mater, 100,1-5.
Al-Baradi, A., Al-Shehri, S., Badawi, A., Merazga, A., and Atta, A. (2018), A study of optical, mechanical and electrical properties of poly (methacrylic acid) /TiO2 nanocomposite, Results Phys, 9, s879–885.
Badawi, A., Alharthi, S., Assaedi, H., Alharbi, A., Althobaiti, M. (2021), Cd0.9Co0.1S
Nanostructures concentrated study on the structural and optical properties of the SWCNTs / PVA blend, Chem Phys Lett, 138701
Ali, B., Gaber, M., Abdallah, S., Johan, B., Mohammed, A., and Mohammed, A. (2021), Exploring the structural and optical properties of FeS filled graphene/ PVA blend for environmental‑friendly applications, Journal of Polymer Research, 28, 1-12.
Amita, S., Tamal, M., and Saswata, G. (2021), Fabrication of cellulose acetate nanocomposite films with lignocelluosic nanofiber filler for superior effect on thermal, mechanical and optical properties, Nano-Structures & Nano-Objects, 25.1-8.
Mohamed, H., Abduelmajid, N. (2018), Optical Parameters of Polyvinyl Alcohol - Molybdenum Oxide Composite Films, Sciences (NWSAPS), 13(4),46-54.
Atta, A., El-Nahass, M., Elsabawy, K., Abd El-Raheem, M., Hassanien, A., Al Huthali, A., Badawi, A.,and Merazga, A. (2016), Optical characteristics of transparent samarium oxide thin films deposited by the radio-frequency sputtering technique, Pramana, 87:72,1-8.
Mostafa, N., Badawi, A., Ahmed, SI. (2018), Influence of Cu and Ag doping on structure and optical properties of In2O3 thin film prepared by spray pyrolysis,. Results in Physics, 10,126–131.
Bouzidi, A., Omri, K., Jilani, W., Guermazi, H., Yahia, IS. (2018), Influence of TiO2 Incorporation on the Microstructure, Optical, and Dielectric Properties of TiO2/Epoxy Composites, J Inorg Organomet Polym Mater, 28,1114–1126.
Abdullah, O., Aziz, S., Rasheed, M. (2016), Structural and optical characterization of PVA:KMnO4 based solid polymer electrolyte, Results in Physics, 6,1103–1108.
Badawi, A., Al-Gurashi, W., Al-Baradi, A., and Abdel-Wahab, F. (2020), Photoacoustic spectroscopy as a non-destructive technique for optical properties measurements of nanostructures, Optik, 201,1-23.
Badawi, A., Al Otaibi, A., Albaradi, A., Al-Hosiny, N., Alomairy, S. (2018), Tailoring the energy band gap of alloyed Pb1− xZnxS quantum dots for photovoltaic applications, J Mater Sci Mater Electron, 29, 20914–20922.
Tauc J. (1974). Amorphous and Liquid Semiconductors, 1st edition, Springer, Boston.p159-220
Badawi, A., Althobaiti, M. (2021), Effect of Cu-doping on the structure, FT-IR and optical properties of Titania for environmental- friendly applications, Ceram Int, 47,1389–1397.
Shehap, A.and Dana, S. (2016), Structural and optical properties of TiO2 nanoparticles/PVA for different composites thin films, Int. J. Nanoelectronics and Materials., 9, 17-36.
Wemple, S. and DiDomenico, M. (1971), Behavior of the electronic dielectric constant in covalent and ionic materials Phys. Rev., B3, 1338-1351.
Omed, Gh., Yahya A. and Salwan A. (2015), In-situ Synthesis of PVA/HgS Nanocomposite Films and Tuning Optical Properties Phys. Mater. Chem., 3, 18-24.
Wug Dong park, Optical constant and Dispersion parameters of CdS Thin Film prepared by Chemical Bath Deposition, Transactions on Electrical and Electronic Materials 13(4), 2012, 196-199.
Rashmi, ch., Amitkumar, S., Arvind, T., and Krishnakant, S. (2011), Linear and nonlinear optical changes in amorphous As2Se3 thin film upon UV exposure, Progress in Natural Science: Materials International, 21, 205-210.
Taha, T., Hendawy, N., El‑Rabaie, S., Asmaa, E., and El‑Mansy, M. K. (2018), Effect of NiO NPs doping on the structure and optical properties of PVC polymer films, Polymer Bulletin, https://doi.org/10.1007/s00289-018-2633-2.
Omed, Gh., Dlear, R. and Sherzad, A. (2015), The optical characterization of polyvinyl alcohol: cobalt nitrate solid polymer electrolyte films, Adv. Mater. Lett., 6,153-157.
El Sayed, A., El-Sayed, S., Morsi, W., Mahrous, S., and Hassen, A. (2014), Synthesis, characterization, optical, and dielectric properties of polyvinyl chloride/cadmium oxide nanocomposite films, Polym Compos, 35,1842–1851
Abdel-Baset, T., Elzayat, M., Mahrous, S. (2016), Characterization and optical and dielectric properties of polyvinyl chloride/silica nanocomposites films, Int J Polym Sci, 2016,1–10
Ahmed, H. and Zinah, H. (2018), Synthesis, Characterization and Nanobiological Application of (Biodegradable Polymers-Titanium Nitride) Nanocomposites, Journal of Bionanoscience, 12, 504-507.
