Department of Electrical and Electronic Engineering

More ...

About Department of Electrical and Electronic Engineering

Facts about Department of Electrical and Electronic Engineering

We are proud of what we offer to the world and the community




Academic Staff






B. Sc. in Electronic and Communication Engineering
Major Electronic and Communication Engineering


B. Sc. in Control and Automation Engineering
Major Control and Automation Engineering



Who works at the Department of Electrical and Electronic Engineering

Department of Electrical and Electronic Engineering has more than 42 academic staff members

staff photo

Mr. Yahya Elsharif Almabrook Ali

يحي علي هو احد اعضاء هيئة التدريس بقسم الهندسة الكهربائية والالكترونية بكلية الهندسة. يعمل السيد يحي علي بجامعة طرابلس كـمحاضر منذ 2015-07-16 وله العديد من المنشورات العلمية في مجال تخصصه


Some of publications in Department of Electrical and Electronic Engineering

ضبط متغيرات المتحكم التناسبي - التكاملي – التفاضلي بالمنطق الضبابي لتحسين الاستجابة العابرة لنظام

Abstract Most of the controllers used in industries are of PID type, this is because they have simple structure and their usage is well known among industrial specialists. The tuning of controllers is the crucial issue in the overall control loop design in order to obtain a satisfactory performance response. Over the past decades many tuning techniques were developed to adjust the controller parameters. Most of these techniques have the disadvantages of giving a combination of heavy oscillatory response, large overshoot, and long settling and rise time. This work presents a fuzzy logic-PID scheme, the basic concept behind this scheme is to combine the conventional PID controller with the use of fuzzy logic concept. The PID controller regulates the process, while the fuzzy logic part adjusts the proportional gain of the controller. This scheme will be used to overcome the previous disadvantages and to improve the performance of the conventional controller. The effectiveness of fuzzy logic-PID scheme has been analyzed through computer simulation using MATLAB. The results have been compared with those of Ziegler-Nichols, Chien-Hrones-Reswick, Cohen-Coon, Optimum PID controller and a PID with constant and variable weighting factor. This comparison has shown a considerable improvement in the performance of the transient response for different simulated processes
علي عبدالرحمن بن عاشور (2008)
Publisher's website

Online Tuning Pole Placement Controller Based onDiscrete State-Space Technique

Abstract In wireless communication systems the data rate, capacity, coverage, and spectral efficiency; can be enhanced with multi-carrier transmission and multi-antenna, then the overall wireless communication system performance is greatly enhanced by combining OFDM and MIMO schemes, MIMO helps in increasing the throughput where as OFDM spreading out the frequency selective fading channel over many symbols. In this thesis evaluating performance of the system depends on both link and system levels, where the measure of performance is represented in the throughput, cell radius and the effective signal to interference plus noise ratio (SINR). It also depends on the employed capacity criterion and it takes into account the impact of adaptive modulation and coding. the worked scenarios start from a link level extending to a system level in 3GPP LTE. To achieve the above a number of tasks followed by observations are carried out. They start by analysis of the equations and a Matlab program is written to calculate the cell edge throughput, cell coverage and DL capacity. After the programs implementation, the multi antenna transmission effect is noted on the arrival throughput when taking into account the modulation technique. When increasing the order of the antenna and the throughput is also increased, but it must be traded off with the probability of error; Coverage has also improved by decreasing the order of the modulation technique. For the system level with different traffic, the overall throughput of the system and the capacity of the network are determined by the number of resource blocks (RBs). These RBs depend on the bit rate of the service and bit rate for each RB. The adopted scenarios in this thesis start from link to system, where the features are represented in a flexible base station and user configurations, channel modeling with path loss, user mobility, also at different transmitter and receiver (MIMO). The approaches are useful in single user and multi-user MIMO, then all of the above can be standardized by metrics: capacity, throughput, spectral efficiency, user QoS etc. Finally thesis conclusion and some future work as an extension of this work are presented.
احمد محمد التانزفتى (2013)
Publisher's website

Voice Quality Enhancement in VoIP Networks byReducing Packets Los

Abstract Voice over IP (VoIP) uses the Internet Protocol (IP) to transmit voice as packets over an IP network, like the Internet, Intranets and Local Area Networks (LAN). Here the voice signal is digitized, compressed and converted to IP packets and then transmitted over the IP network. However, at the receiving end, some packets may be missed in its way due to network congestion. This packets loss degrades the quality of speech at the receiving end of a voice transmission system in the IP network. Since the voice transmission is a real time process, the receiver cannot request for retransmission of the missing packets. High speed networks provide real time variable bit rate service with packet loss requirements. The burstiness of the correlated traffic makes dynamic buffer management highly desirable to satisfy the Quality of Service (QoS) requirements. This thesis presents an algorithm to improve and optimize the Adaptive Buffer Allocation Scheme to deal with input traffic based on loss of consecutive packets in data streams and buffer occupancy levels. Buffer is designed to allow the input traffic to be partitioned into different priority classes, and based on the input traffic behavior it controls the threshold dynamically. This scheme allows input packets to enter into buffer if its occupancy level is less than the threshold value for priority of that packet. The threshold is dynamically varied in runtime based on packet loss behavior. The performance evaluation is carried out using simulation and is carried out for two and multiple priority classes of the input traffic "real time and non real time classes". The simulation results show that the Modified Adaptive Partial Buffer Sharing (ADPBS) has better performance than Adaptive Partial Buffer Sharing under the same traffic conditions.
اسماء احمد الكيش (2010)
Publisher's website