ملخص
Abstract
The contribution of this thesis is to improve the understanding of acoustic dynamics in the audio duct with Helmholtz Resonator (HR). In this project, detail measurements of acoustic in a duct with HR induced loud–speaker at various frequencies have been carried out experimentally. Two-microphone technique have been used to measure the net acoustic power transmission in the duct downstream of HR along with the net acoustic power transmission in the duct without the HR. The acoustic wave signals are traveling in the duct as a plane wave, these waves are generated by a signal generator system with a know wave (sine wave). One of the microphone is located just before the neck–duct interface and the other microphone after the HR in the duct. Five type of necks ( perforated neck length 15cm, perforated neck length 10cm, cone–shape neck, Non- perforated neck length 15cm, Non-perforated neck length 10cm ) and three different material of the bottom wall of the cavity ( Teflon, water and cotton ) have been studied. The best results has a good advantage that by using (perforated neck length 15 cm and 4cm diameter because that reduction of noise has been reached 64% percentage and that value is the highest reduction from all experimenting.