Thermo-Economic Analysis of Gas Turbine Combined Multistage Flash (MSF) Desalination Cycle

Date

2024-1

Type

Article

Journal title

INTERNATIONAL JOURNAL OF RESEARCH AND SCIENTIFIC INNOVATION (IJRSI)

Author(s)

Entesar Betelmal

Abstract

Over the past few decades, the growth of the earth’s population has increasingly contributed to global warming, and increased demand for fresh water on top of a need for a greater power supply. This paper will analyze the integration of a combined- gas turbine with intercooler and a multi-stage flash (MSF) desalination plant for the simultaneous generation of electricity and supply of water and improved performance. The paper will also examine the calculation of the production cost and the capital cost of the MSF desalination plant. The thermo-economic analysis of the study was conducted using the IPSEpro software system. Also, exergy losses of the gas turbine and MSF desalination unit were also calculated. The desalination plant uses the exhaust gases from the gas turbine, as a form of thermal energy, and discharges to feed the seawater heater. A portion of the desalinated water is used to cool the compressed air in the intercooler heat exchanger. Results indicate the improvement in the gas turbine’s performance when desalinated water is used for the intercooler between compressor stages, as the power output increased by 59% over the the simple gas cycle and found decrease with an increase in the ambient temperature. The desalinated water cost was calculated to be $1.7 per cubic meter after determining the optimal configuration and operating conditions. A decrease in steam cost by 36% was observed when the waste heat from the gas turbine was used as the source of thermal energy. Part of this reduction can be explained by the observation that the desalination plant’s pumps consume part of the power generated by the gas turbine.

Fulltext

View

Publisher's website

View