Abstract
The main purpose of this paper is to design, verify and implement 16_bit RISC (Reduced Instruction Set Computer) processor that can be used for many embedded applications. The basic modules of this processor are programmed and simulated using Verilog HDL (Hardware Description Language), and implemented on Cyclone IV FPGA (Field Programmable Gate Arrays). Compared with general CPU it is not merely simplified the instruction set system but also make the computer structure simpler and more rational through simplifying the instruction system. Thus, the operating speed is highly improved. RISC adopts hardwire logic instead of micro-program control to realize its sequential control signals. The speed of control sequence generated is much faster than using micro-program control because it has saved the time of fetching microinstruction. The philosophy of RISC design presented here favors a smaller and simpler set of instructions. Those instructions take the same amount of time to execute. The philosophy of our design architecture was to keep the instruction set very simple. This in turn implies that addressing modes supported by instruction set a further streamlined compared to CISC (Complex Instruction Set Computer) architectures. Avoiding such addressing modes must be kept to minimum, which leads to the instructions that can be executed effectively in eight clock cycles.